On Demand Video Courses - Professsional Development for Enginneers and Technologists

IDC Technologies

Providing training for over 500,000 Engineers and Technicians since 1991

AGLBHPBPChevronRio TintoShellTataToyota

PD-SP Practical Power Distribution

  • Duration:
  • Investment: US$ 299
Certificate:

Must complete all lessons

Content

Viewed
Overview

Description

This is a practical online course on power distribution, focusses on medium voltage (1kV- 36kV) power considerations, switchgear, power cables, transformers, power factor correction, earthing, lightning protection and network studies. You will gain technical know-how in these areas not covered by university or college programs.

 

YOU WILL LEARN HOW TO
Correctly implement the right type of switchgear for the appropriate application
Economically select and install the best-suited power cable for a specific application
Evaluate the need for power factor correction and successfully implement correction strategies
Implement successful maintenance strategies and procedures
Effectively use software techniques to solve problem areas in your power network

 

WHAT’S INCLUDED?
The full technical eBook manual for “Practical Power Distribution” which includes course slides, cases studies, calculations and practical exercises\

 

COURSE OUTLINE

INTRODUCTION

  • History and growth of power distribution
  • Typical characteristics of a distribution system
  • Main components of a distribution system
  • Main equipment types in a distribution system
  • Electrical safety and power security

 

OVERVIEW OF POWER DISTRIBUTION

  • Voltage classification
  • Multiple voltage levels in power distribution
  • Types of distribution arrangements and redundancy
  • Expandability


MEDIUM VOLTAGE CIRCUIT BREAKERS I

 

MEDIUM VOLTAGE CIRCUIT BREAKERS II

  • Role of a circuit breaker in a distribution system
  • Distinction between circuit breaker and disconnector/isolator
  • Different types of circuit breakers and their operating principle
  • Comparison of relative features and applications
  • Circuit breaker operating mechanisms
  • Circuit breaker ratings

 

POWER CABLES

  • Types and construction of cables
  • Basic design and selection
  • Insulating materials for LV and HV cables
  • Accessories for cable installation
  • High voltage power transmission using cables
  • Failure of cables
  • Fault detection
  • New technologies – superconductivity for high capacity cables

 

SHORT CIRCUIT CURRENT CALCULATIONS

  • What is a fault?
  • Effects of a fault
  • Types of faults
  • Limiting the damaging effects of a fault
  • Need to know the magnitude of fault current
  • Fault current calculations

 

TRANSFORMERS

  • Introduction
  • Transformer theory
  • Transformer construction
  • Transformer cooling
  • Transformer voltage control
  • Power transformers and distribution transformers
  • Installation of transformers
  • Special aspects in installation of large power transformers
  • Fire protection measures for large transformer installations
  • Transformer troubleshooting

 

MV SWITCHGEAR

  • Switchgear options
  • Outdoor MV switchgear
  • Indoor MV switchgear
  • MV switchgear panel configurations
  • MV switchgear auxiliary devices
  • MV switchgear ratings

 

ELECTRICAL SAFETY AND ROLE OF EARTHING

  • Overview of system earthing
  • Hazards posed by electrical equipment
  • Electrical shock hazard
  • Direct and indirect contact
  • Role of protective earthing
  • Indirect contact hazard – importance of protection
  • Sensing of earth faults
  • Equipotential bonding
  • Use of Personal Protective Equipment (PPE)
  • Arc flash danger in electrical equipment

 

POWER QUALITY AND PF COMPENSATION

  • Limits on electrical parameters
  • What is power quality?
  • Power quality indicators
  • Power quality improvement measures
  • Causes and effects of low power factor
  • Power factor compensation
  • Methods to improve power factor and benefits
  • Economic justification for power factor correction - worked out examples
  • Caution: capacitors with induction motors

 

POWER SYSTEM AUTOMATION

  • Definition of the term
  • What is power system automation?
  • Power system automation architecture
  • Use of DCS

Investment

Plan Name Investment
Unlimited Access for 2 Years: US$ 299

Instructor

Behrouz Ghorbanian

BSc, MSc, MIEAust

Behrouz has completed degree courses in Telecommunications and Electrical Engineering overseas. He also completed his studies in Electrical Utility Engineering at Curtin University in 2004. Behrouz started his career in the oil and gas industry where his role got him involved in the maintenance and repair of electronic and navigational marine equipment (VHF and SSB radios, Sat Nav, engine control panels etc). He then moved to the power industry and was involved in the design, installation, and commissioning of substations mainly for consultancies and utilities. He has also established a good reputation in teaching power system protection over his long term services lecturing at Curtin University, and also over the period he worked as a Protection Engineer in New Zealand.

Over the past years, Behrouz has been involved in many major projects across Australia (Port Hedland, Barrow Island, Tamar Valley, Karratha, and Newman for example). His most recent experience is related to cost estimation and risk assessment of major substation projects with a special focus on the secondary systems (Protection, COMMS, SCADA). He has also worked as an Engineering Manager and Senior Project Engineer on major copper mine projects overseas. Behrouz has also gained good knowledge in substation design, HV cables sizing and installation, transmission system design, earthing system design and applications, and power system protection design and applications.

Courses by this presenter

Name Level Release Date
EN-SP Electrical Power Systems for Non Engineers 31-08-2015
EK-SP Inspection, Testing and Commissioning 08-09-2015
AF-SP Arc Flash Protection for Electrical Safety Professionals 26-08-2015
TF-SP Practical Power Transformers 23-09-2015
AC-SP Practical Fundamentals HVAC 07-10-2015
PT-SP Fundamentals of Process Plant Layout and Piping Design 28-10-2015
PD-SP Practical Power Distribution 18-11-2015
ER-SP Practical Earthing (Grounding), Bonding, Lightning and Surge Protection 19-11-2015
MK-SP Best Practice Electrical Engineering in Mining, Building Industry and Utilities 15-01-2016
MKa-SP Understanding Basic Costings for Apprentices and Technicians 15-01-2016
PS-SP Practical Power System Protection 25-01-2016
EY-SP Fundamentals of Electrical Substation and Switchyard Design 28-01-2016
MEY1-SP Role and configurations of substations, system studies, switchyard technical specifications 10-02-2016
MEY2-SP Fault limiting, PFC, harmonic control, protection design 10-02-2016
MEY3-SP Earthing systems, switchyard lightning protection, control and interlocking 10-02-2016
MEY4-SP Switchyard facility planning, GIS SWGR 11-02-2016
MEY-SP Advanced Electrical Substation and Switchyard Design 11-02-2016
MEY5-SP Overview of MV metal enclosed SWGR, MV substation design & specifications 11-02-2016
DIA4-SP Advanced Industrial Automation - Plant Layout and Piping Design 14-02-2016
DIA-SP Specialized Engineering (Industrial Automation) 25-02-2016
BCIIP-SP Relay Theory and Basic System Protection 16-03-2016
SAK-SP Swiss Army Knife of Videos on Engineering Skills 08-06-2016
EN4-SP Electrical Power Systems - Transformers 01-07-2016
EN5-SP Electrical Power Systems - Earthing Systems 01-07-2016
EN6-SP Electrical Power Systems - Power Protection 01-07-2016
PS6-SP Practical Power System Protection - Feeder Protection 01-07-2016
PS8-SP Practical Power System Protection - Instrument Transformers 01-07-2016
PS18-SP Practical Power System Protection - Generator Protection 01-07-2016
PD2-SP Practical Power Distribution - Overview of Power Distribution 18-11-2015
EN3-SP Electrical Power Systems - Measurements and Applications 01-07-2016
EN12-SP Electrical Power Systems - Power Quality 01-07-2016
Viewed
Duration
Overview

Student Login

Log in  \/ 
x
Register  \/ 
x

Why Undertake a Video Course?

Completely Online

All videos and eBooks can be viewed entirely online

Complimentary eBooks

Receive an eBook (or two) for each course you purchase

2 Year Unlimited Access

Have access to the course at any time of the day, for a period of 2 years

Repeat Viewing

All videos and eBooks can be viewed multiple times throughout the 2 year period

Downloadable Certificate

Unlock a certificate as proof of course completion

Free Courses

SAK-SP Swiss Army Knife of Videos on Engineering Skills
  • 11222 Students

It is our silver anniversary in the training and education industry and we are celebrating it with you! Receive your exclusive and complimentary access to the IDC Technologies’ “Swiss Army Knife...

DMC8-SP Mechatronics and Remote Engineering - Digital Circuit Design
  • 1203 Students

Was $99 - now no charge to register for this course.  Register here *On registration return to the main course page, click on the "Green Enrol" button. Digital circuits are the basic...

eBook Downloads

All of our included eBbooks require the free CopySafe Reader

Copy Safe Reader CopySafe Reader from Artistcope

IDC- Online Accepts Paypal

Australian residents who purchase a course/s are charged 10% GST.

This is in addition to the course price and is included in the Paypal Invoice.

Who is online

We have 210 guests and 8 students online

Go to top